Atheros AR9341 Smart Home 2.4G wireless router

Product overview

1. Product introduction

First of all thank you buying iSigal intelligent wireless router.

It is an intelligent wireless router,with learning type infrared remote controller,433M and 315M radio frequency modular .Open software interface for air cleaner,electronic scale,blood pressure meter,air conditioning,TV,lighting,smart plug etc.With the Phone APP remote or local to control such products,then realization of home electrical appliance,and household health product to be intelligent control.

2. The main features

*Provide a 10/100m Ethernet(WAN)interface,can meet xDSLModem/CableModem/Ethernet.

*Internal integration of four switches provide four 10/100m Ethernet(LAN)interface.

*Provide 802.11n,300M wireless wifi,support WPA/WPA2 encryption,wireless wifi MAC address filtering.

*Built-in network address translation (NAT)function

*Built-in firewall

*Support the software upgrade

*Support remote and Web management

3.Specifications

Standards and protocols		IEEE802.3,IEEE802.3U,IEEE802.3X, 802.11b,802.11g,802.11n, TCP/IP,CHCP,ICMP,NAT,PPPOE
Other standards		Infrared remote control,RF-433M,RF-315M
Prot	LAN prot	Four adaptive 10/100 RJ45 port
	WAN prot	1 adaptive 10/100 RJ45 port
Network media		Class 10 base-t:3 or 3 type above UTP
		100 base – TX:5 type of UTP
The LED indicator	Port	1/2/3/4(LAN),WAN(indicating the port of the Link state/Act)
	Other	POWER (POWER indicator light),WLAN(wireless Link/Act)
Shape size L*W*H		179.16mm*183.45mm*34.9mm
Using environment		Working temperature: 0℃ to 40℃
		Storage temperature: -40℃ to 70℃
		Working humidity: 10% to 90% RH don’t condense
		Store humidity: 5% to 90% RH don’t condense
Power supply voltage		DC 12V/1A

Hardware description

1. Indicator light

Light/Button	Describe	Function
POWER	Power status indicators	Light-connected power supply
		Dark-unconnected power supply
LAN(1/2/3/4)	LAN status indicators	Dark-port is not connectde
		Light-port is not connected
		Blink-port is transmission data
WAN	WAN status indicators	Dark-port is not connected
		Light-port is connected
		Blink-port is transmission data
WLAN	Wireless status indicators	Dark-wireless is not on
		Blink-wireless transmission data

2. Hardware connection

3. Reset

If you want to restore the default configuration,when the router is under the condition of electricity,using a pointed object press the RESET button,wait for about 5 seconds,release the RESET button,the router will restart.

4. Installation environment

The router installation should comply with the following principles:

*use equipment rated power adapter

*place the devices in a horizontal flat surface

*the thunderstorm weather,pleass remove the equipment power supply and all attachment,from lightning damage

*away from heat,keep ventilated

*in the storage,transportation and operation environment,please pay attention to waterproot

Login equipment
*PC must connect to the router LAN port
*check the PC proxy settings,If the current computer is using a proxy server to access the internet,the first must ban the proxy services
*run a Web browser,please enter in the browser address bar Http://192.168.2.1 in the browser address bar(the default management the IP address,login to modify)and press enter.
pop-up window,when for the first time login,please enter the default administrator user:admin,password:admin(can enter the management interface to change this password),and then click(login)button

The APP Settings

1. Download the app

Open the smart phone,into the “QQ”,or the other QR code scanning software,scanning to the left of the QR Code,download the corresponding APP of ios or android.

2. Add the place

Connect to iSigal router,open the App,click”add”,The system enters the add interface,input place name (such as guest hall,bedroom,kitchen,toilet,etc.,),click on the”Save”will appear to the page (as shown in figure1)

3. Add the device

Click places (such as the “living room”)into the place page ,click on”add”into”Device List” page(as shown in figure 2),click on the Router enter “device type”(as shown in figure 3).

In the “Device Type”page,find the corresponding equipment then Click it (as shown in figure 4)

Find the corresponding equipment type and click it.Then waiting for download infrared code library(according to equipment Type,take a few seconds to 30 seconds ),after downloading code Library is complete,In the pop-up interface,input the device name and save it.equipment added successfully.

If there is no corresponding equipment type in the “model list”or”device type”.It would be need to learn code,the first to enter the”device type”page(as shown in figure 3),click on the “other”,enter”Device Learn”page(as shown in figure 5),click on the “add”.other way:enter the “Model list “page(as shown in figure 4).click on the”other”.enter “Device learn”page (as shown in figure 5).click on the add.

Input device name (such as curtain)and key name(such as opening and closing,etc.)chose which type you want to learn For example.Click on the corresponding device type(infrared remote control,433M,315M).then use the remote controller to learn buttons code make remote controller aligned related position of router(Figure 7),press the button,then completed the add(Fig.6)

Atheros AR9341 Smart Home 2.4G wireless router Images